Pump is Installed

The Fuel Pump is installed, ran new wiring from the relay to the pump and a new ground wire. I put a new AN-10, 45 degree fitting on the end that connects to the regulator and a 90 degree fitting at the pump end of the hose.

I had to put in a new cutoff switch for my alternator. The old switch just stopped working.

The hose had to be installed exactly as it would be to get the correct length. The final installation was about six inches too long, which is great! Everything is held in place with tie-wraps for now. I have to do my leak test before I install hose clamps to make it permanent.

April 6, 2021